Poppys WoodTech - 7mm Scale items

7mm New Items

Ballast Brake Departmental Van, LNER Diag203 widespread use into TOPS period £49.50 The kit includes body, roof, internal furniture and building jigs, also available brass chassis sections for the kit £17.50.
ProTrack Aligners from ModelTech ready for soldering rail and power cables. 4 ends in a pack £10.
Fits 2mm sleepers e.g. C&L Finescale. Poppy's fillers are available for Peco track. £3.50 for 4
.
More details on our ProTrack Aligners page
New to our range. NER clerestory coaches, this is diag7.
Body kit only £79.50. Body mouldings now available. Beading options available to order. Check the full range of available diagrams on our information sheet. (PDF)
Wagon Turntable £6.50 A useful addition to quaysides and small yards.
BR Brake Van interior £8.95. Variants to fit M&M, First Class and Connoisseur kits.
A useful addition to our assembly jigs, this one for axle spacing of 1/8inch axles. Version2 now has extra spacing including bogies. £8.95. Version 1 now £6.50.
Poppy's Re-Railer, easy alignment and rail placing for finescale track. Confirms vehicle back to back before vehicles go into service. Takes a full coach for confident train assembly. £13.75

7mm Coach Bodies

New to our range. Ballast Brake Departmental Van LNER diag203, 1948 to TOPS and preserved.Body kit including jigs £49.50.
The kit includes body, roof, internal furniture and jigs for assembly. Body kit now available, including instructions how to detail and make your own chassis. Also available brass chassis sections for the kit £17.50.
New to our range. NER diag7 composite.
7 compartments + Locker clerestory.
Body kit only £79.50. Body mouldings now available. Beading options available to order. Check the full range of available diagrams on our information sheet. (PDF)
North Eastern 6 wheel coach bodies;
5 compartment 3rd Diag. 19 and Brake 3rd Diag. 15, both £49.50.

All coach kit orders include a cradle to form the roof and ensure each roof matches the body.
Highland Railway 6 wheel coach bodies;
5 compartment 3rd Diag.9 and 4 comp't composite with Locker Diag.19, both £49.50.
LBSC HorseBox moulding set (Highland 6 wheel coach set also available)£23.00
NER 6 wheel coach moulding set £25.00
Adjustable 6 wheel chassis for our 6 wheel coach range and other uses. Uses Cleminson principle to position centre axle and end axles are compensated,£29.50 ea.
For each coach in the 6 wheel range we can provide a matching underframe kit. £4.00 each.
LBSCR Stroudley 'Twin' Horse Box. Body Kit £39.50
Roof panel shown smooth side out.
LBSCR Stroudley 'Double' Horse Box. Body Kit £39.50
Roof panel shown planked side out
Everything loaded and ready to go!
Ready for a days at the Races?

7mm Scale Tools

Measuring Stick £5.00
More details on our Tools page
Ballasting Box £9.75
More details on our Tools page
7mm Loco Builder's Box, available in 5 versions in 7mm,
Small (for industrial locos and tenders) £33, Medium (up to 35ft footplate) £35, Large (over 35ft) £39, 8 Coupled £42, and 10 Coupled £45
More details on ourTools page
A handy tool to keep your kits square £2.50

Line up your boiler fittings 'Straight Down the Middle'
Align the tool from the cab side then place your fittings aligned to the shilouette and vertical lines. £3.50
7mm Loco Planked Floor Panel £2.00
60 x 60mm, One size – cut to fit
Loco Planked Floor Panel £3.50
Specially shaped for the Hachette LNER A3 and A4 locomotives

7mm Trackside

Coal Platform £15.50
Walls can be attached at platform or ground level. Platform size 60x120mm
Barrow Crossing £6.50
Kit includes sufficient for a double track crossing. Surface size 42x175mm.
Small Timber Goods or Provender Shed £29.50
The shed has doors on both sides, and includes textured roof covering.
Wagon Turntable £6.50. Provides a surface covering for a wagon turning facility and extra interest for those Warehouse or quayside settings.
Platform Canopy - 400mm £27.50 800mm £55.00
Includes; trusses, framing, valances and roof panels. 100mm wide x 48mm high. Alternative valance patterns can be provided on request.
Canopy Posts - £24.00 for 400mm canopy length of 5 Solid cast posts -
A set with one hollow post is also available to compliment our canopy light kit; £26.00 set.
Canopy Lighting Set £6.50. Set of 12 LEDs
12 LEDs arranged as 4 sets of 3 to compliment our Platform Canopy. ** Maximum of 12 volts **
Rural Platform £18.75
Many uses in rural, light industrial or milk depot locations. Platform size 70x280mm.
Platform Ramp £11.25
Matches our Rural Platform or stand alone to reach brick or raised platforms. Platform size 70x140mm.
Shed Doors £3.75
Pair of doors for goods light industrial or milk depots. Each door 70mm high x 52mm wide.
Coal Staiths £11.50
Our original staithes pattern, with eight panels to build into combinations of your choice.
Size of this horizontal configuration is 240mmx60mm.
Vertical Coal Staiths £11.50
Vertical Sleeper Coal Staith panels also has eight panels to build into combinations of your choice.
Go to our customer photos page for ideas.
Buffer Stop £5.75
Used sleeper construction. Complete the buffer stop wth one of our warning light kits.
Warning Lamp kit £7.50 *** back in stock.
Includes LED, larger switch, larger battery and holder. Shown here on our sleeper built Buffer Stop.
Road Crossing £5.00
Used sleeper construction.
Surface size 119x175mm.
Cattle Pens £10.75
Each kit includes fence panels and gates of a modular construction to make the facility shown here, but flexible to build one that suits your location.
Cattle Pen Ramp Fence £4.75
Each kit includes 8 fence panels, here shown in 2 rows of 4. Compliments our Cattle Pens, or can stand alone as a fence for inclines.
Cattle Grid £3.00 Each kit includes parts for 2 grids - note; does not now include metal rolling parts.
Keeps livestock on the side of the boundary where they are meant to be – kits are the width of common roadway.
Goods Platform £13.75 ** Back in stock **.
Kit contains 2 ramp walls, 2 straight walls and a cobble surface, sufficient to make the platform shown with our cattle pens. Available with either brick or stone walls.
Country Milk Pick Up Two kits ideal for country lanes before or after milking; one with cast churns and base £7.50, the other just a platform £3.75.

7mm Scale Fencing

Traditional Midland Style £10.50
Each kit includes 5x18ft panels – totals 630mm length
Template for straight or sloping ramp £2.25
Starter Set £12.75
Diagonal Midland Style £10.50
Each kit includes 5x18ft panels – totals 630mm length
Template for straight £2.25
Starter Set £12.75
Not a Midland modeller? They are only the pattern, think of Midland as 'boundary' fence because of the height.
Gate Set available in 3 sizes, all £3.75 per set
2x4’3” and 2x3’3” wide (4 gates per set)
2x 6’0” (2 per set), and 2x 8’0” (2 per set)
First sample cut - Inspection by the boss!
Difficult to believe, this was back in May 2013 - nearly 10 years ago! The close-boarding is for crossings.
LNWR Style £10.50. Each kit includes 8x9’9”ft panels, totals 545mm length. Template £2.25; straight or ramp. Starter Set Straight or Ramp £12.75
Gate Set now available
to match LNWR fencing £3.75 per set
2x4’3” and 2x3’3” wide (4 gates per set)
Not a LNWR modeller? They are only the pattern, think of LNWR as 'security' because of the heights.
3bar Lineside Fencing £10.50
Each kit includes 12x9ft panels – totals 756mm length - nearly 30inches. Kits can be built with or without stays.
4bar Lineside Fencing £10.50
Each kit includes 12x9ft panels – totals 756mm length - nearly 30inches. Kits can be built with or without stays.
5 Bar gates to match Lineside Fencing £3.75
Each gate is 9'6" wide" Kits can be built with or without diagonals and includes posts. Also sold in pairs.

7mm Scale Valances

Southern Valance (3 X 29cm) £12.50
Midland Valance (3 X 29cm) £12.50
Great Eastern Valance (3 X 29cm) £12.50
Great Western Valance (3 X 29cm) £12.50
GWR valance now also available as a 2 hole varient and canopy and end shapes
Canopy Ends, influenced by the Great Eastern, £10.00
Packs of 4, either Straight or Curved both 147mm wide
Highland (Mallaig) Valance (3 X 29cm) £10.00 (sale price)
Based on Mallaig station West Highland Extension

GWR entrance canopies, and platform ends available to order
£ - send details of your reqirements for the location you are modelling.
SECR, LBSCR valance (and other railways).
Based on Folkestone, 3x29cm £12.50

7mm Scale Wagon Interiors

BR 13 ton Highbar £5.00
Floor and sides inserts for M&M Models wagon kits
BR Medfit £2.50
The generic floor insert for many wagons including
M&M Models wagon kits
BR Pipe £5.50
Floor, side doors and ends inserts for wagons including M&M Models wagon kits
Floor only for longer wagons;
Bogie C - up to 45’ bed, 315mm £4.75
Bogie E - up to 32’ bed, 224mm £3.75
Floor inserts for many wagons including for
M&M Models wagon kits
Great Western 3, 4, 5 and 7 Plank side doors £5.50
Floors and ends inserts for wagons including CooperCraft now Slaters andPOWSIDESwagon kits
Midland 5 Plank side or side and end doors £5.50
Floors and ends inserts for wagons including Slaters 7027, 7028 andPOWSIDESwagon kits
Gloucester 5 Plank side and end doors £5.50
Floors and ends inserts for wagons including Slaters 7055 andPOWSIDESwagon kits
Gloucester 6 Plank side doors £5.50
Floors and ends inserts for wagons including Slaters 7035 andPOWSIDESwagon kits
Gloucester 6 Plank side and end doors £5.50
Floors and ends inserts for wagons including Slaters 7036 andPOWSIDESwagon kits
Gloucester 5 Plank side doors £5.50
Floors and ends inserts for wagons including Slaters 7044 andPOWSIDESwagon kits
Gloucester 7 Plank side or side and end doors £5.50
Floors and ends inserts for wagons including Slaters 7058 or 7059 andPOWSIDESwagon kits
Chas Roberts side doors £5.50
Floor, sides and ends inserts for wagons including Slaters 7040 andPOWSIDESwagon kits
Chas Roberts side and end doors £5.50
Floor, sides and ends inserts for wagons including Slaters 7041 andPOWSIDESwagon kits
RCH 7 Plank side door £5.50
Floor, sides and ends inserts for wagons including Slaters side door 7048, or side and end doors 7047, andPOWSIDESwagon kits
RCH 8 Plank side and end doors £5.50
Floor, sides and ends inserts for wagons including Slaters side door 7046, or side and end doors 7045, andPOWSIDESwagon kits
S&DJR Van Conversion £3.75
Converts Slaters MR 10ton covered wagon 7024 into cupboard door version for S&DJR, Cheshire Lines, and MR Road and Banana van.
BR Brake Van interior. £8.95 Variants to fit M&M, First Class and Connoisseur kits.
New wagon inserts option to fit 3H wagon Kits 3 plank drop side, 5 plank side doors and 7 plank 'London' doors all at £5.50
Tail Light kit £6.50
Includes LED, small switch, battery and holder.
Brake Van Veranda £3.75
End panel inserts for M&M Models wagon kits
Build Your Own 5 plank kit and 7 plank assembled
Inspired by "Decorate your own P.O. wagon" in
May 2018 Gauge 0 Guild Gazette; all sizes £5.00
Assembled 7 plank Build Your Own wagon on a
4 plank GWR wagon to give a size comparison
Refer to the Gazette article and personalise your fleet
GWR W12 Cattle Wagon insert kit £9.50
Made to match the Warren Shepherd brass kit
Made up Cattle Wagon insert to show the kit parts.
Can be adapted for other Cattle and Ale wagons
Planked load pack, shows one pack £2.50
Cut to size to represent a tallied pack load.
The wagon load and the pack that made it.

ProTrack Rail Aligners

ProTrack aligners from ModelTech ready for soldering rail and power cables. 4 ends in a pack £10.
Fits 2mm sleepers e.g. C&L Finescale. Poppy's fillers are available for Peco track. £3.50 for 4
.